NEW! We are proud to offer LEECRAFT Zero-Clearance table saw inserts which are definitely SUPERIOR to any other brand! We think you'll agree that Leecraft's attention to detail and careful precision manufacturing are unmatched.
LEECRAFT Phenolic Table Saw Inserts reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. The opening in the insert is cut on the table saw to the exact width of the saw blade’s kerf. The matching kerf prevents thin slices of wood from jamming in between the blade and the throat plate during a cut. It also reduces the amount of tear-out that can happen with a standard insert.
From the Manufacturer
The Zero Clearance concept is simple: the blade cuts its own perfectly sized slot by being raised through a machinable "blank" insert. Most inserts are 1/2-inch thick, high-density phenolic laminate, with a bonded-melamine surface. They offer superior rigidity, flatness, durability, and low friction and should not be confused with inferior HD/PP inserts. There's just no comparison! They feature leveling screws, side and end adjustment screws for a vibration-free fit, rear safety pin for lift-out protection, and a pre-cut blade bottom pocket that provides clearance for fully retracted blades and bevel cuts. Instructions also included. Use carbide-tipped blades only. A pre-cut starter pocket makes cutting the clearance slot easy and a finger hole makes for simple removal and hanging. Colors may vary. Made in USA.
Before ordering please measure your saw throat opening. Then check below to find the proper model for your table saw:
Model #CR-1 Leecraft Zero-Clearance Table Saw Insert fits Sears CRAFTSMAN 10" belt-drive models 1977 to mid 2004 (Check size, see DL-1U), RIDGID TS2412, TS2424, TS2400 (Please Note: CR-1 does not fit models TS2400LS, TS2400-1 or the new TS2410)
Model #CR-2 Leecraft Zero-Clearance Table Saw Insert fits Sears CRAFTSMAN, Older 10" belt-drive, Including models: 113.29901, 113.29903, 113.299040, 113.29943, 113.299142
Model #CR-3 Leecraft Zero Clearance Table Saw Insert fits Sears CRAFTSMAN, Vintage 10" belt-drive, including models: 103.29992, 113.27520, 113.27610, 113.27970, 113.29920, 113.29990, 113.29991, 113.29992
Model #DL-1U Leecraft Zero-Clearance Table Saw Insert fits DELTA: Unisaw & LEFT-TILT UNISAW, 10" Contractor, 10" Tilt Arbor Saw, "Hybrid" & Left-Tilt Contractor; GRIZZLY G1023; JET CTAS-10; POWERMATIC 63; CRAFTSMAN 22104, 22114, 22124; BRIDGEWOOD BW10TS; Steel City 35605, 35610, 35670, 35675, 35680, 35685
Model #DL-2 Leecraft Zero-Clearance Table Saw Insert fits DELTA 10" DIRECT DRIVE - Models include #34-670, #34-740 (Super-10), #36-380 (XL-10) #36-600, QT-10, TS-300 & TS-350 and JET #JSL-10TS SHOPLINE
Model #DW-2 Leecraft Zero-Clearance Table Saw Insert fits DeWALT: DW744 & DW745 (factory splitter/guard incompatible with DW-2 insert on these saws) & DW746
Model #GE-1 Leecraft Zero-Clearance Table Saw Insert fits GENERAL International: 350 (Right Tilt) & 650 (Left Tilt)
Model #GE-2 Leecraft Zero-Clearance Table Saw Insert fits GENERAL International: 50-220, 50-090K; JET: 10" Workshop Table Saw (Stock #708100), JPS-10 Pro-Shop (Stock #708482, 708483, 708480K)
Model #JT-164 Leecraft Zero-Clearance Table Saw Insert fits JET: JTS-10, JCS-10, JWTS-10, JTAS-10, JWCS-10; POWERMATIC: 64 & 64A (left-tilt); SUNHILL: most 10" saws; BRIDGEWOOD: TSC-10C & TSC-10CL; KING KC 10GC; SHOP FOX: W1703, W1714, W1725, W1726; GRIZZLY: G0444, G0444Z, G0575, G0576
Model #JT-2L Leecraft Zero-Clearance Table Saw Insert fits JET XACTA SAW LEFT (JTAS-10XL); SHOP FOX: W1677, W1711; GRIZZLY G1023SL
Model #JT-5 Leecraft Zero-Clearance Table Saw Insert fits JET Deluxe XACTA Saw - Zero Clearance (with riving knife slot)
Model #JT-6 Leecraft Zero-Clearance Table Saw Insert fits JET Deluxe XACTA Saw - Zero Clearance/Dado (WITHOUT riving knife slot)
Model #PM-1 Leecraft Zero-Clearance Table Saw Insert fits POWERMATIC 66; BRIDGEWOOD BW10LTS
Model #PM-6 Leecraft Zero-Clearance Table Saw Insert fits POWERMATIC PM2000 - Zero Clearance (riving knife slot)
Model #RG-1 Leecraft Zero-Clearance Table Saw Insert fits RIDGID TS3650, TS3660
Model #RG-1U Leecraft Zero-Clearance Table Saw Insert fits RIDGID TS2400LS, TS2410LS & TS2400-1 (Alloy Top Portable) AND TS3650 & TS3660 (Cast Iron Top Contractor)
Model #SC-1 Leecraft Zero-Clearance Table Saw Insert fits Steel City 10" Cabinet Saw Model #35900 Series - Zero Clearance (riving knife slot) Rigid R4511
Model #SC-2 Leecraft Zero-Clearance Table Saw Insert fits Steel City 10" Riving Knife Cabinet Saw Model #35900 Series - Zero Clearance/Dado (WITHOUT riving knife slot) Rigid R4511
Model #HT-1 Leecraft Zero-Clearance Table Saw Insert fits C10FL & C10LA
NEW! We are proud to offer LEECRAFT Zero-Clearance table saw inserts which are definitely SUPERIOR to any other brand! We think you'll agree that Leecraft's attention to detail and careful precision manufacturing are unmatched.
