Forrest Saw Blades - Dampeners/Stiffeners

DAMPENERS/STIFFENERS are designed to provide a smoother, quieter cut.

Normally, best results are obtained by selecting one stiffener 1/2 to 2/3 the blade diameter and mounting it against the OUTSIDE of the saw blade. For example, a 10" blade uses a 5" stiffener.

10" saw blade minus 6" dampener/stiffer equals 2" depth of cut. 10" saw blade minus 5" dampener/stiffer equals 2-1/2" depth of cut.

Note: Be sure any bumps or scratch-burrs on saw blades and arbor flange, are stoned flat for dust-free FLAT metal-to-metal contact between stiffener, blade and arbor flange.

These important support discs:

• Help kill saw "scream-whistle" from a vibrating blade surface
• Dampen out motor and belt vibrations from being transmitted up to the rim of the teeth
• Greatly reduce cutting noise
• Hold blade rigid and true for better cuts on your machine
• Are hardened and precision ground flat within .001" to keep your blade true
• Can be removed instantly if the need occurs

Dia:	Bore:	Teeth:	TS:	Kerf:	Type:	Price:
4"	5/8"				Dampener/Stiffener with 5/8" Hole	$19.75
Model: ST04
5"	5/8"				Dampener/Stiffener with 5/8" Hole	$21.75
Model: ST05
6"	1""				Dampener/Stiffener with 1" Hole	$29.75
Model: ST06A
6"	5/8"				Dampener/Stiffener with 5/8" Hole	$22.75
Model: ST06
7"	5/8"				Dampener/Stiffener with 5/8" Hole	$23.75
Model: ST07
8"	1"				Dampener/Stiffener with 1" Hole NOTE: Dampener will not fit DeWalt Miter Saws	$25.75
Model: ST08
10"	1"				Dampener/Stiffener with 1" Hole	$29.75
Model: ST10